Placing A Call - Cisco LINKSYS one PHM1200 User Manual

Placing a Call

Here are some easy options you can use to place a call.
If you want to... Then...
Place a call using the handset Pick up a handset and enter a number.
See "Using the Handset, Headset and Speakerphone" on
page 17.
Place a call using the
Press the speakerphone button
speakerphone
See "Using the Handset, Headset and Speakerphone" on
page 17.
1. Plug a headset into the headset port on the back of the
Place a call using the headset
2. Press the Headset feature button
3. Press the speakerphone button
See "Using the Handset, Headset and Speakerphone" on
page 17.
Redial a number Press the Redial feature button to dial the last dialed
extension or an outside number.
1. Press the Hold button on the phone.
Place a call when another call is
active
2. Press an intercom or outside line button to make the call
3. Enter a number.
AutoDial a number Do one of the following:
• Lift the handset and press the Auto Dial button for the
• To use the speakerphone, simply press the Auto Dial
12
and enter a number.
phone.
.
to place a call using
the headset.
phone number or extension you want to call.
button without lifting the handset.
Linksys One Communications Solution
Chapter 3: Using Your Phone
Basic Call Handling Options
3