Table of Contents
Advertisement
4.2 How to Calibrate
Step 1
1.
Initial leveling of the platform
before shipment, if the first
layer is printed successfully at
the first printing, subsequent
leveling steps may not be
performed
Step 2
1.
When printing the nozzle is
found to be distant or close to
the platform, but the overall
flatness of the platform has not
changed, that is, the nozzle is
equal to the height of the four
corners of the platform, please
click the screen in the automatic
leveling, wait for the completion
of the 49 points of height
detection error, and then print
test
16
Print More Materials, All For Application
Step 3
1.
When printing the nozzle is
found to be distant or close to
the platform, but the overall
flatness of the platform has not
changed, that is, the nozzle is
equal to the height of the four
corners of the platform, please
click the screen in the
automatic leveling, wait for the
completion of the 49 points of
height detection error, and
then print test.
2.
Print the compensation
parameter file once after
modification and burn it to the
machine
Advertisement
Table of Contents
