Table of Contents
Advertisement
4.2 Load/Unload Filament
4.2.1 Load Filament
Step 1
1.
Straighten the filament, cut the
filament to the tip
Step 4
If the material is stuck in the
1.
middle of the pipe, the
connector at the right side of
the X-axis can be taken out
and fed in sections.
Step 2
1.
Hang the filament into the
filament box
2.
and press the extrusion clamp
on the end
Keep feeding the filament until
3.
it cannot be fed
Step 5
1.
After the filament is delivered
to the print head
2.
Preheat temperature is applied
3.
Click the downward extrusion
button
4.
Wait for the material to flow
out of the nozzle
Click to stop extrusion
5.
— 21 —
Print More Materials, All For Application
Step 3
Observe that the filament
1.
reaches the front print head
Advertisement
Table of Contents
