Table of Contents
Advertisement
Step 4
1.
Turn the limit control knob to
"2".
Note:
The non-leveling knob
must be in the "1" position.
Overall
High Limit
Z-Negative:
Limit
Emergency
Stop
1.
Use the integrated adjustment screw and the limit
height fine adjustment screw together
2.
Enable the Z negative limit just trigger, and start
the print test
(Please see the detailed steps in the use of video)
1.
Click on leveling
2.
Wait for the machine to
automatically find the 49 test
points and test them
Remove the automatic leveling
3.
aid and turn the knob back to
the "1" position
Step 7
Step 5
1.
When a power failure trip occurs during use.
2.
Disconnect the connector of the emergency stop
trigger device
3.
Open the electrical box and close the gate of
leakage protection
— 20 —
Print More Materials, All For Application
Step 6
1.
Control Z-axis descent by
using different strokes
Make the nozzle 0.1mm away
2.
from the platform
Step 8
Advertisement
Table of Contents
