Table of Contents
Advertisement
Step 4
1.
Control E1 and E2 extrusion by
touch screen
2.
Observe whether the left and
right nozzle gears rotate as
shown
Step 5
1.
ccess to the preheat function
A
and temperature setting of the
hot bed, left nozzle and right
nozzle can be done through
the touch screen.
2.
Where the right-side
temperature represents the
setting temperature
3.
The temperature on the left
side represents the actual
temperature
4.
First preheating recommended
hot bed temperature: 50℃ ±
2℃
5.
Print Head 1 and 2: 210℃±
2℃
6.
Please be careful of high
temperature and cautious
operation
— 18 —
Print More Materials, All For Application
Advertisement
Table of Contents
