Hardware Checking - IEMAI Large Scale Operating Instructions Manual

3.3 Hardware Checking

Step 1
M
1. anually control the XYZ axis
movement through the touch
screen
2. Observe whether the normal
shown
movement as
Step 2
Find the positive and negative
1.
limits of XYZ axis respectively
— 17 —
Print More Materials, All For Application
Step 3
1. Place a sheet in the Z-axis
negative limit slot to make the
limit red light go out.
2. Moving the Z-axis upward and
hearing a beep and no
movement of the Z-axis
indicates that the Z-positive
limit switch is normal.
Remove the sheet
3.