Table of Contents
Advertisement
4. Print Operation
4.1 Operation of Auto-Calibration
1. Carry out the basic leveling of the
platform to ensure that the basic
leveling of the platform will not be
excessively inclined
Step 1
1.
Press the spring firmly
2.
Ensure that the platform does
not shake
Step 4
1.
Adjust the nut
2.
So that the platform and nozzle
just pass through the object
Step 2
1.
Raise z-axis platform
Step 5
1.
Push the print head to the inner
corner by hand
2.
Adjust again
14
Print More Materials, All For Application
Step 3
1.
Use fixed height objects as
shown
2.
Positioning platform with
nozzle height
Step 6
1.
Hand push to the last corner
of the adjustment, after the
completion of the platform
four points from the nozzle
distance are the same height.
Advertisement
Table of Contents
