Table of Contents
Advertisement
The first page of the configuration wizard is a welcome page. This page gives a brief description of
the configuration process. Click Next to continue. We'll explain what to do step-by-step in the
following subsections.
2.5.2. ConfigWizard Step 1: Selecting an Operational Mode
If the WIASA is to be used simply as a wireless-to-Ethernet access point, select Simple Access
Point. In this mode, the Ethernet WAN interface is disabled.
If the WIASA is to be used with a DSL or cable modem and the IP address assignment for the
Ethernet WAN interface is achieved by PPPoE, select Router with a PPPoE-Based DSL/Cable
Connection.
If the WIASA is to be used with a DSL or cable modem and the IP address assignment for the
Ethernet WAN interface is achieved by DHCP, select Router with a DHCP-Based DSL/Cable
Connection.
If the WIASA is to be used with a DSL or cable modem and the IP address of the Ethernet WAN
interface has to be manually set, select Router with a Static-IP DSL/Cable Connection.
If the WIASA is to be used with a V.90 modem or ISDN TA, select Router with a Dial-up
Connection.
NOTE:
The LAN interfaces include the IEEE 802.11b wireless LAN interface and the Ethernet LAN
interfaces. These two interfaces share a LAN IP address.
Fig. 6. Operational modes.
10
Advertisement
Table of Contents
