Table of Contents
Advertisement
BigPond
User Name
Password
Login Server
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the Cable Modem connection. You can start using the router now,
if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
2.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section. (See chapter 1 "Fixed IP" for more
detail)
2.2.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 "PPPoE" for more detail)
2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 "PPTP" for more detail)
2.2.5 DNS
A Domain Name System (DNS) server is like an index of IP addresses and Web addresses. If
you type a Web address into your browser, such as www.router.com, a DNS server will find that
name in its index and the matching IP address. Most ISPs provide a DNS server for speed and
convenience. If your Service Provider connects you to the Internet with dynamic IP settings, it is
likely that the DNS server IP address is provided automatically. However, if there is a DNS server
that you would rather use, you need to specify the IP address of that DNS server here.
chapter 1 Step 3 "DNS" for more detail)
that PC for the Clone MAC Address button to work). To find out
the PC's MAC address see Appendix A. (see Glossary for an
explanation on MAC address)
BigPond is commonly used in Australia. If your ISP need you to
do the BigPond login, please enable it.
The user name required by BigPond login.
The password required by BigPond login.
The BigPond login server address.
33
(See
Advertisement
Table of Contents
