Client Filtering - Intellinet 523295 User Manual

2.5.2 Client Filtering

If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Client Filtering allows
users to define the traffic type permitted in your LAN. You can control which PC client can have
access to these services.
Parameters
Enable Client Filter
IP
Port
Type
Block Time
Description
Check this box to enable Client Filtering function.
Enter the client IP range that you want to filter.
Enter the port range of services that you want to
restrict the clients to access.
Select the protocol type of services that you want to
restrict the clients to access.
Select "Always" if you want to block the clients
from accessing the services all the time. Select
"Block" if you want to block the clients from
49