7.3 Print
Problem 1: Prompt #1 or #2 no material, cannot print
properly
Problem 2: The print appears to be detached from the
bottom and is carried away
Problem 3: Dual head printing does not work well
together
Problem 4: Use of automatic unload filament,but stuck
between extrusion gear and extrusion clamp
Problem
Add material at the filament-warning test
After determining that the platform is able to print that
material, adjust the platform and nozzle gap when the
zero point is small (see Printing - Installing the Build
Platform and Leveling for more information)
According to the maintenance - nozzle spacing
adjustment spacing
Remove the extrusion clamp and cut off the deformed
front end of the material
36
Print More Materials, All For Application
Solution