Dual Print Head Auto-Switching Setting Method - IEMAI MAGIC-HT-PRO Operating Instructions Manual

6.6 Dual Print Head Auto-Switching Setting Method

1. Create a new model with dual head switching on the
slicing software
2. This model is only used for dual-head printing
3. This setting is not necessary for single-head printing
1. Find the TXT file with the name Start Code #1 in the
random SD card
1. Find the TXT file with the name Start Code #2 in the
SD card
Step 1
Step 3
Step 5
1. After setting the corresponding model size and
other parameters
2. Enter the extrusion head 1 (left nozzle) parameter
position
1. Copy the contents of the file and paste it into the
start code box
1. Copy the contents of the file and paste it into the
start code box
2. Complete the dual-head switch setting
30
Print More Materials, All For Application
Step 2
Step 4
Step 6