Table of Contents
Advertisement
As in the case of Figure 1.
The skirt line is loose and independent, and
separated by one root. This means that the nozzle
is a little far from the platform, you can increase
the automatic leveling compensation parameters
to make the nozzle and platform closer to the
distance
As in the case of Figure 2.
The skirt lines are connected and fused into
one plane. This means that the distance between
the nozzle and the platform is more appropriate,
and such a skirt effectively increases the contact
surface between the model and the platform,
increasing the adhesion force.
Attention: If the nozzle is too close to the platform, there is no gap between the platform and the
nozzle, it will lead to nozzle extrusion without supplies, so printing with a good observation of the skirt
can be very good to help us improve the success rate of printing.
40
Print More Materials, All For Application
Advertisement
Table of Contents
