Table of Contents
Advertisement
4.3 Load/Unload Filament
Step 1
1.
Print temperature according to
the material to be loaded
2.
Preheat
3.
Refer to Step 10 for the
preheating temperature of
different materials
Step 4
1.
Load the material through the
break test port
2.
Manually feed it to the gears
Step 2
1.
Straighten the material
Step 5
1.
Click to load materials "
2.
E1 for the left nozzle, E2 for the
right nozzle
18
Print More Materials, All For Application
Step 3
1.
Cut the material to the tip
Step 6
"
1.
Till the nozzle appears fine
filament
2.
Click "
" Stop loading
and unloading command
Advertisement
Table of Contents
