Print Interface - IEMAI HIGH-TEMPERATURE Series Operating Instructions Manual

2.3.3 Print Interface

Figure 1: Main Interface
Click "Print" to go to Figure 2
Figure 4：Print Setting Interface
1. This interface can be adjusted
during the printing process
2. Print Speed Ratio, Temperature
of Hot Bed, Nozzle
3. Fan Rate of E1/E2 and Chamber
4. Extrusion flow
5. Setting power off after printing
Figure 2: File Interface
Check Specify G-code file to print or
delete the file
- 16 -
Print More Materials, All For Application
Figure 3: Print Interface
1. This interface is the main
interface in print You can view
thumbnails
2. Hot bed, Nozzle Temperature
and chamber temperature
3. Elapsed time, Time remaining 、
Current speed
4. File name, Print Progress Bar
5. You can control pause (resume)
and stop printing
Figure 4
6. Press " " to