Table of Contents
Advertisement
Installing the Truecharge™ 2 Battery
Charger
WARNING: Shock and Energy Hazards
Be sure to read the safety guidelines and pay attention to all
cautions and warnings throughout the installation procedure. The
installer is responsible for ensuring compliance with the installation
codes for your particular application.
Disconnect all sources of AC and DC power before proceeding.
Installation Sequence
To make charger installation quick and easy, Xantrex
recommends that the installation tasks be performed in the
following sequence:
1. Mount the charger in position.
2. Connect the DC ground.
3. Install DC wiring including installing required
4. Install AC wiring including earth grounds.
5. Power up the charger.
975-0402-01-01
This guide for use by qualified installers only
Elcodis.com
electronic components distributor
All manuals and user guides at all-guides.com
Installing the Truecharge™ 2 Battery Charger
disconnects, fuses, or breakers.
2–13
Advertisement
Table of Contents
