Functional Test Program 2 - Fisher & Paykel AWF60MD Manual

Functional Test Program 2

Note: The following information is applicable to software version 6038
and later.
To enter the test program follow the steps below.
Note: Remove any garments from the machine before commencing this
test.
Step 1
Ensure that the machine is turned on at the power point, and off on the
display, also ensure that the On/Off button is in the Off position.
Step 2
Using the program selector knob select Cotton 90oC.
Step 3
Press and hold the Start/Pause button, then press the On/Off button once
keeping the
Start/Pause button held down for an additional four seconds.
To confirm that the Test Program has been entered correctly "----" will be
displayed.
Note: At this stage the door lock will activate. If the test program is
terminated early, you must wait until the door interlock has cooled
sufficiently.
Functional Test Sequence
To start the functional test press the Start/Pause button, to advance to the
next step press the
Start/Pause button. To exit or cancel from the test program press the On/Off
button.
Note: If a particular function fails to activate it would indicate a failure in
that area.
7