Heater Testing - Fisher & Paykel AWF60MD Manual

Front loading washing machine
Hide thumbs Also See for AWF60MD:
Table of Contents

Advertisement

1.
Fault code
2.
Software
version
3.
LED check
4.
Motor (CW)
5.
Motor (CCW)
6.
Motor (CW)
7.
Prewash
(Cold)
8.
Main Wash
(Cold)
9.
Softener
(Cold)
10. Main Wash
(Hot)
11. Heater
Element
12. Spray pump
test (not fitted
to AU models)
13.

HEATER TESTING

During the above test program it is possible to test the heater element.
On entering the functional test "----" will be displayed after
the door is locked.
If a fault code has occurred the fault code will appear on
the display.
The software version of the Control Module will be
displayed in the LED screen.
All the LED's on the display will blink.
The number '4'will be displayed on the seven segment
display, if the water level is above flood level the drain
pump is activated until a safe level is reached, then the
main wash motor will rotate at 52 rpm in a clockwise
direction.
The number '5' will be displayed on the seven segment
display; the main wash motor will rotate at 52 rpm in a
counter-clockwise direction.
The number '6' will be displayed on the seven segment
display; the main wash motor will spin up to 900rpm in a
clockwise direction.
The number '7' will be displayed. Water will fill from the
cold valve into the Prewash Compartment while
decelerating form 900rpm.
The number '8' will be displayed. Water will fill from the
cold valve into the main wash Compartment.
The number '9' will be displayed. Water will fill from the
cold valve into the softener Compartment.
The number '10' will be displayed. Water will fill from the
hot valve into the Main wash Compartment.
The number '11' will be displayed. The heater will turn on.
For heater testing refer to section on heater testing. Note:
If the water level is not high enough then both the hot and
cold water valves will turn on to fill to the correct level.
'12' will be displayed on the seven segment display.
The heater turns on.
Spray pump is tested (if fitted)
The main wash motor will rotate at a speed of 52rpm
'12' will be displayed and the drain pump will activate.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wh60f60w1Wh70f60w1

Table of Contents