Otto Bock Zenit Instructions For Use Manual page 32

Use
48
Placement of the personal restraint system integrated in the vehicle for transporting persons with
reduced mobility
1) Pull the respective ends of the restraint lap belt from the inner side of the seat through to the outside. (see
fig. 50).
2) Engage the ends of the restraint lap belt on the mounting point/pin of the rear lashing straps on the left and
right sides respectively (see fig. 51).
Alternatively, the end of the restraint lap belt can also be attached on the bottom of the vehicle for transporting
persons with reduced mobility with the help of a belt reel or retractor (seat belt tightener).
3) Secure the shoulder harness on the mounting point/pin provided on the lap belt (not illustrated).
→ The restraint lap belt is pulled through and fastened.
→ The belt runs between the side panel and seat cushion on each side.
49
51
32
50
Zenit