Otto Bock Zenit Instructions For Use Manual page 28

Use
2) Remove the seat cushion.
3) Only with the "Folding back support" option: Pull the release strap for the folding mechanism of the back
support upwards (see fig. 37) and fold the back support down (see fig. 38).
Only with "Leg support with unlocking" option: Press down the lock button on the foot plate and fold the
unlocked foot plate up (see Page 18).
4) Pull the release strap for the folding mechanism (see fig. 39).
5) Fold the wheelchair (see fig. 40).
6) Fasten the safety strap (see fig. 41).
7) Reach between the spokes of the drive wheel with your fingers and press the knob of the quick-release axle
with your thumb. Pull off the drive wheel outwards (see fig. 6).
INFORMATION: For the "lock-release assist" option, see the section "Drive wheels".
37
39
41
Zenit R; Zenit R CLT – rigid frame version
1) Apply the wheel lock.
2) Remove the seat cushion.
28
38
40
Zenit