Otto Bock Zenit Instructions For Use Manual page 12

Safety
CAUTION
Risky operation
Falling, tipping over backwards due to approaching obstacles incorrectly
► Push slowly when crossing obstacles (e.g. steps, curbs) and negotiating uphill or downhill slopes and
inclines.
► Never cross obstacles at an angle. Always approach obstacles head on (at an angle of 90°).
► Raise the front wheels before crossing obstacles.
► Avoid collisions with obstacles and dropping off curbs/ledges.
► Avoid riding cross-country.
CAUTION
Lack of tipping resistance on public transport
Tipping over, user falls, damage to the product due to incorrect positioning
► When using public transit, always observe the currently applicable legal requirements and the safety notices
of the public transit operator.
► Use the permanently installed seats in the vehicle. If you depend on using your wheelchair as a seat, please
use the designated wheelchair spaces and safety securing equipment provided. Always ensure that you are
held in place securely.
CAUTION
Incorrect handling at level crossings
User may fall or tip over due to driving error
► Only cross railway systems and railway tracks in the designated areas.
► Negotiate level crossings so the caster wheels of the product cannot get caught in the gap between the rail
and the road surface.
CAUTION
Driving in the dark
Risk of collisions with other traffic participants due to lack of lighting
► Wear bright clothing or clothing with reflectors.
► Install active lighting on your product.
► Ensure that the reflectors on the product are clearly visible.
Hazards when overcoming obstacles
WARNING
Overcoming steps and obstacles without assistance
Tipping over, falling of the user due to failure to observe transportation instructions
► Always have accompanying persons help you negotiate steps and other obstacles.
► Use available facilities (e.g. access ramps or lifts).
► If such facilities are not available, have 2 assistants carry you over the obstacle.
WARNING
Improper lifting by attendants
Tipping over, falling of the user due to lifting by removable components
► Only lift the product by firmly mounted components (e.g. main frame, push handles).
► Be sure that the clamping levers of the height-adjustable push handles are firmly tightened.
12 Zenit