Caster Wheels And Caster Forks - Otto Bock Start M1 Instructions For Use Manual

CAUTION
Reaching into exposed drive parts
Crushing, pinching due to incorrect handling
► Do not reach between the drive wheel and wheel lock or drive wheel and side panel when driving the product.
► Do not reach into the spokes of the rotating drive wheel while riding in the product.
CAUTION
Defective tyres
Accidents/falling due to poor traction, reduced braking force or lack of manoeuvrability
► Ensure that the tyres have sufficient tread depth.
► Replace the drive wheels in case of tyre damage (tread surface extends up to 5 mm to the edge of the tyre,
cracking) or damage on the rim.
CAUTION
Heat development when braking with handrims
Burns due to insufficient hand protection
► Wear wheelchair gloves when travelling at high speeds.
The wheelchair is moved, steered, braked and stopped with the help of the handrims on the drive wheels.
Removing and mounting the drive wheels
1) Release the wheel lock.
2) Grip the area between the spokes near the hub with your fingers.
3) Use your thumb to press the push-button on the quick-release axle.
4) Pull off/push on the drive wheel. It must not be possible to remove the quick-release axles after releasing the
push-button.
25

7.9 Caster wheels and caster forks

WARNING
Failure of caster wheels or caster forks
Falling, severe injury due to the wheelchair tipping over
► Regularly inspect the caster wheels and caster forks for damage.
► Regularly clean and oil the caster wheel axles and the threaded axles on the caster forks, especially in case of
stiffness.
► Inform the responsible qualified personnel in case of permanent changes to the driving characteristics.
Start M1
Use
21