Otto Bock Start M1 Instructions For Use Manual page 15

5
Removing the leg support – elevating leg support/amputation leg support
1) Activate the release lever (see fig. 7/see fig. 8, item 1).
2) Pull the leg support up and off (see fig. 7/see fig. 8, item 2).
Attaching the leg support – elevating leg support/amputation leg support
1) Insert the leg support into the leg support retainer from above (see fig. 7/see fig. 8, item 2).
2) Push the leg support down until it engages.
7
Adjusting the angle of the elevating leg support/amputation leg support
1) Hold the leg support and turn the release lever upwards to the stop (see fig. 9/see fig. 10, item 1).
2) Set the angle (see fig. 9/see fig. 10, item 2).
3) Let go of the release lever. The leg support will automatically snap into place in the next free position.
9
Fastening the calf strap
1) Open all hook-and-loop closures.
2) Thread the calf strap through the eyelet on the foot plate (see fig. 11).
Start M1
6
8
10
Use
15