Wash Options - Fisher & Paykel WASHSMART WA1068G Installation Manual/User Manual

Water Level
Auto water level
Your washer has the ability to automatically select the most efficient water level for the
load.
1
2
When washing an unusual load, eg large bulky garments, items or pillows, we recommend
you select the
HANDWASH
select the water level.
Manual water level selection
The agitator has five levels marked on its stem that can be used to help you select the
correct water level. Select the correct water level by using the mark nearest to the top of
the load.

WASH OPTIONS

cycle. If there is already water in the bowl, it is best to manually
The levels marked on the agitator do not correspond exactly
z
to the level of the water. They indicate the level of dry clothes
suitable for the water level.
Your washer may occasionally add water during agitation.
z
This is to maintain the water level due to the release of air
trapped in the garments.
Out of balance loads, tangling or splash-over can be caused
z
by selecting a water level that is too high.
Place your clothes in the machine and select
the wash cycle. Press
automatically selected.
Touch . The machine will automatically fill
to the correct water level for the load, for
both phases of the wash.
water level if not
AUTO
23