Fisher & Paykel WASHSMART WA1068G Installation Manual/User Manual page 31

2
Wash Temp
EOC Beeps
3
Controlled Cold
If the temperature of your cold water supply is very low and you choose to do a
you will not get an effective wash. The
adding a small amount of hot water to raise the temperature of the wash to approximately
20°C.
Wash Temp
1
EOC Beeps
CHANGING PRE-SET OPTIONS
OOB
Recovery
Factory
Reset
CONTROLLED COLD
OOB
Recovery
Factory
Reset
Select the wash temperature you want
to adjust, e.g.
WARM
button. The digital display screen
WASH TEMP
displays the current setting.
Touch or
MORE LESS
decrease to the desired temperature. Each
increment is equal to approximately 0.5°C.
option solves this problem by
Enter the Option Adjustment mode, refer
to the 'Option Adjustment mode' for
instructions.
Select the
REGULAR
, by touching the
to increase or
COLD
cycle.
wash,
31