Water Level
Auto water level
Your washer has the ability to automatically select the most efficient water level for
the load.
1
2
When washing an unusual load, eg large bulky garments, items or pillows, we recommend
you select the 'Bulky' cycle. If there is already water in the bowl, it is best to manually select
the water level.
WASH OPTIONS
Manual water level selection
The agitator has five levels marked on its stem that can be used
to help you select the correct water level. Select the correct water
level by using the mark nearest to the top of the load.
The levels marked on the agitator do not correspond exactly
z
to the level of the water. They indicate the level of dry clothes
suitable for the water level.
Your washer may occasionally add water during agitation. This
z
is to maintain the water level due to the release of air trapped
in the garments.
Out of balance loads, tangling or splash-over can be caused by
z
selecting a water level that is too high.
Place your clothes in the washer.
Select the wash cycle (and select
level if not automatically selected).
Touch
. The washer will automatically fill to
the correct water level for the load, for both
phases of the wash.
water
AUTO
23