Fisher & Paykel WASHSMART WA1068G Installation Manual/User Manual page 30

Adjusting your options
Wash Temp
1
EOC Beeps
2
Wash temperatures
All wash temperatures can be individually adjusted if you think they are too hot or too cold.
The hot temperature will be the same as the hot water supply temperature.
Wash Temp
1
EOC Beeps
30
CHANGING PRE-SET OPTIONS
OOB
Recovery
Factory
Reset
OOB
Recovery
Factory
Reset
Enter the Option Adjustment mode,
refer to the 'Option Adjustment mode'
for instructions.
The display with change when you enter
Option Adjustment Mode. Options you can
change are accessible using the
,
HEAVY EASY IRON
the options, ie select the
button to modify the wash temperature and
cycle button to change the out of
HEAVY
balance (OOB) recovery process, and so on.
Use the
DELAY START
panel to scroll through the available settings
of your selected option, eg to increase or
decrease the temperature of your warm wash
temperature, or to change the number of
beeps at the end of the cycle.
Enter the Option Adjustment mode, refer
to the 'Option Adjustment mode' for
instructions.
Select the
REGULAR
REGULAR
and cycle. Adjust
ALLERGY
cycle
REGULAR
, button on the
MORE
cycle.
,