Fisher & Paykel WASHSMART WA1068G Installation Manual/User Manual page 34

2
Factory reset
You can reset your washer to the settings it left the factory with:
Wash Temp
1
EOC Beeps
2
Wash Temp
EOC Beeps
3
34
CHANGING PRE-SET OPTIONS
OOB
Recovery
Factory
Reset
OOB
Recovery
Factory
Reset
Touch the
MORE
decrease the number of beeps, or for no
beeps to sound at the end of the cycle.
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions
Select the
ALLERGY
The display will show
for 3 seconds to reset your washer to its
factory settings.
This action will reset the washer to the
default settings, exit Option Adjustment
mode and restart the washer in normal
operating mode.
Touch to exit if you do not wish to reset
your washer. To save changes and exit from
the Option Adjustment mode at any time (ie
to return to normal operating mode), touch
.
button to increase or
cycle.
. Touch and hold