Fisher & Paykel WASHSMART WA1068G Installation Manual/User Manual page 33

Automatic recovery
Your washer will try to automatically correct the out of balance load. It will fill with water
and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery option:
Wash Temp
1
EOC Beeps
2
End of cycle beeps
The beeps signalling the end of the cycle can be increased or decreased. The default
setting is 5 beeps
Wash Temp
1
EOC Beeps
CHANGING PRE-SET OPTIONS
OOB
Recovery
Factory
Reset
OOB
Recovery
Factory
Reset
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the cycle.
HEAVY
Touch to turn
MORE
AUTOMATIC RECOVERY
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the
EASY IRON
or .
cycle.
33