Otto Bock Renegade RS1 Instructions For Use Manual page 8

Instructions for Use (R-720-003, Rev. J)
8 |
Renegade_A4.indd 8
• Never allow aggregates such as sand to remain in the foot shell. Upon
exposure to aggregates, immediately disassemble foot module and rinse with
water. The abrasive properties of aggregates will quickly wear the graphite
components of the foot module.
• Never insert the sole plate inside the Spectra™ sock of the Renegade® foot
module. This will lead to premature failure of the foot module.
• Never use the Renegade® foot module without the sole plate.
removal will adversely affect the performance of the foot module. The sole plate
fills the mid-foot void between the Z-Shock and toe lever, preventing potential
user injury.
• Freedom Innovations foot modules are manufactured to fit industry standard
pyramids and receivers. It is the prosthetist's responsibility to select and/or
fabricate properly fitting attachment components.
• Never attempt to loosen the bolt affixing the pyramid connector.
• Discontinue use and consult your prosthetist if any part of the prosthesis starts
to make noise.
• Inform your prosthetist if you lose or gain a significant amount of weight.
• Freedom Innovations foot products are manufactured and tested for a particular
weight and activity impact level. Use by another user for whom it was not
originally manufactured may cause injury and shall void any written or implied
warranty.
Sole plate
English EU
RS1 Renegade®
08.02.2021 15:11:00