Error Codes - Innosonix MAXX Series User Manual

4.3.4. ERROR CODES

Table 5. SEVERITY LEVEL
TYPE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
Table 6. ERROR CODES
NR SEVERITY
1 INFO
2 INFO
3 INFO
4 INFO
5 ALERT
6 INFO
7 ALERT
8 ALERT
9 ERROR
10 INFO
11 ALERT
12 EMERGENCY,
13 ERROR
14 ERROR
15 ALERT
16 ALERT
17 EMERGENCY
18 WARNING
19 ALERT
2021-10-20 | Rev. 3.7.5
DESCRIPTION
system is unusable
action must be taken immediately
critical conditions
error conditions
warning conditions
normal but significant condition
informational
DESCRIPTION
Power on
IP mode set to DHCP
IP mode set to AUTO IP
IP mode set to STATIC IP
UDP Discovery error, device no longer available, please try to restart the device
device reboots for software update
Interfaces monitoring and control no longer available, please try to restart the
device
Speaker monitoring no longer available, please try to restart the device
Display Interface no longer available, please try to restart the device
Samplingrate changed, EQs, Limiter, FIR Filter will be recalced
DSP monitoring/control no longer available, please try to restart the device
Hardware verification failed, no Audio available
Metering no longer available, please try to restart the device
Amplifier overcurrent error
Amplifier overcurrent Shutdown
Amplifier recurring overcurrent error, check wiring and powercycle channel to try
again
Amplifier communication error, please try to restart the device
Amplifier overtemp
Controller monitoring no longer available, please try to restart the device
MA32/D
Chapter 4. SOFTWARE
4.3. USER INTERFACES
4.3. USER INTERFACES | 52/60