Table of Contents
Advertisement
About the IE-MediaChassis/1-DC
The IE-MediaChassis/1-DC is a stand-alone chassis for use with iMcV modules. As an
unmanaged chassis, the IE-MediaChassis/1-DC supports a single-wide iMcV module.
All iMcV modules, with the exception of the SNMP management card, will function
properly in this chassis.
The IE-MediaChassis/1-DC contains an internal Telco compatible DC power supply.
Installing the IE-MediaChassis/1-DC
Use the IE-MediaChassis/1-DC as a table-top chassis, mount in a Rackmount shelf,
or mount it to a wall surface with Rackmount brackets.
1.
Install the IE-MediaChassis/1-DC by placing it on a flat surface.
2.
If mounting the chassis on a wall, place two #10 panhead screws (not
supplied) on the wall the distance of the holes on the chassis, and then
hang the unit on the screws.
3.
Attach the cables between the chassis and the device that will be
interconnected, and then plug the unit into a reliable, filtered power
source.
4.
It is suitable for mounting on concrete or other non-combustible surface
only.
The Rackmount kits for the
To purchase our Rackmount kits; visit the IMC Networks' Product Accessories page:
https://www.imcnetworks.com/Products/acc.cfm
IE-MediaChassis/1-DC
1
are sold separately:
Advertisement
Table of Contents
Need help?
Do you have a question about the IE-MediaChassis/1-DC and is the answer not in the manual?
Questions and answers