Data Cloning; (Ic-Pcr2500 Control Software Must Be Installed) - Icom IC-R2500 Instruction Manual

■ DATA cloning

Cloning allows you to quickly and easily transfer the pro-
grammed contents from a personal computer to a receiver
using the IC-PCR2500 control software.
D Cloning using a personal computer
Data can be cloned to and from a personal computer (Mi-
crosoft ® Windows ® XP/2000/Me/98SE) and other settings can
also be programmed from a PC. Consult the IC-PCR1500/IC-
PCR2500's Instruction manual for cloning details.
USB cable
to ground
to AC adapter to USB port
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.

(IC-PCR2500 control software must be installed)

Main unit
PC
OTHER FUNCTIONS
D Available functions
➥ Reading or writing Clone data
➥ Programming memory channels/memory banks/scan
edges
➥ Programming set mode settings
➥ Transferring the data of PC (PCR2500) to receiver (R2500)
or receiver (R2500) to PC (PCR2500)
➥ Automatic mode settings
• The automatic mode setting automatically sets the receive
mode, IF filter passband width, tuning step, etc. after inputting
frequency ranges.
➥ Skip area settings
• The skip area setting is available for skipping unwanted fre-
quency ranges that inconveniently stop scanning.
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
66