Icom IC-R2500 Instruction Manual page 68

10
SET MODE
D D RX call sign indication
This item stores and indicates the newest received call sign.
The received call sign is cleared once the receiver is turned
OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
D D RX RPT1 call sign indication
This item stores and indicates the newest received RPT1 call
sign. The received call sign is cleared once the receiver is
turned OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
61
Appears
(AAAAAA: Call sign example)
Appears
(BBBBBB: Call sign example)
D D RX RPT2 call sign indication
This item stores and indicates the newest received RPT2 call
sign. The received call sign is cleared once the receiver is
turned OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
(CCCCCC: Call sign example)
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
D D RX message indication
This item stores and indicates the newest received message.
The received message is cleared once the receiver is turned
OFF.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
(HELLO: Message example)
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
Appears
Appears