Icom IC-R2500 Instruction Manual page 66

10
SET MODE
D D DV unit power setting
Selects the DV unit (UT-118) power setting from Auto and
ON.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• At : DV unit is turned ON automatically when digital
mode is selected. (default)
• On : DV unit is turned ON when the receiver is pow-
ered ON.
D D Call sign setting
Sets your own call sign for digital call sign squelch operation.
Up to 8 characters are programmable.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
• Push [MODE•SCAN] (or [MONI•T/T-SCAN]) to move the cursor.
• Rotate main band's [DIAL] to select the desired character or code.
59
D D Digital code setting
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available. (default: 00)
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
D D Data speed setting
Sets the low-speed data communication speed between the
receiver Main unit and PC to 4800 bps or 9600 bps.
☞This item appears when optional UT-118 is installed
and Optional items setting (p. 58) is ON.
(default: 9600 bps)