Printing Multiple-Language Pdfs; Solving Printing Problems - IBM InfoPrint 1622 User Manual

Printing multiple-language PDFs

Symptom
Some documents do not
print.

Solving printing problems

Symptom
The control panel display
is blank or displays only
diamonds.
Jobs do not print.
Held jobs do not print.
Troubleshooting
Cause
The documents contain
unavailable fonts.
Cause
The printer self test
failed.
The printer is not ready
to receive data.
The output bin is full.
The specified tray is
empty.
You are using the wrong
printer driver or are
printing to a file.
Your internal print server
is not set up properly or
is not connected
properly.
You are using the wrong
interface cable, or the
cable is not securely
connected.
A formatting error has
occurred.
The printer has
insufficient memory.
The printer has received
invalid data.
Printing multiple-language PDFs
Solution
1 Open the document you want to print in Adobe Reader.
2 Click the printer icon.
The Print dialog appears.
3 Check the Print as image box.
4 Click OK.
Solution
Turn the printer off, wait about 10 seconds, and turn the printer
back on.
If the Performing Self Test and Ready messages do not
appear, turn the printer off and call for service.
Make sure Ready or Power Saver appears on the display before
sending a job to print. Press
state.
Remove the stack of paper from the output bin, and then press
.
Load paper in the tray.
• Verify you are using the printer driver associated with your
printer.
• If you are using a USB Direct interface, make sure you are
running Windows 2000, Windows XP, or Windows Server 2003
and using a printer driver compatible with Windows 2000,
Windows XP, or Windows Server 2003.
Verify that you have properly configured the printer for network
printing.
Make sure you are using a recommended interface cable.
Make sure the connection is secure.
• Print the job. (Only part of the job may print.)
• Delete the job.
• Free up additional printer memory by scrolling through the list of
held jobs and deleting others you have sent to the printer.
Delete the job.
52
to return the printer to the Ready