Table of Contents
Advertisement
Turning on Reduced Curl mode
If the print media is curled once it exits the printer, Reduced Curl mode can be turned on to help reduce the problem.
However, before turning this mode on, you should try the possible solutions offered in Troubleshooting. For more
information, see The paper is curled once it exits the printer.
Note: Print speed is significantly slower in Reduced Curl mode.
1
Turn the printer off.
Note: Disabling the control panel menus does not prevent access to Print and Hold functionality.
2
Press and hold
3
Release both buttons when the memory information appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
until
5
Press
until
Submitting Selection appears briefly. The control panel returns to Reduced Curl.
6
Press
until
7
Resetting the Printer appears briefly followed by a clock. The control panel then returns to Ready.
The printer returns to the Ready state.
Solving option problems
If an option does not operate correctly after it is installed or if it quits working:
•
Turn the printer off, wait for about 10 seconds, and turn the printer on. If this does not fix the problem, unplug the
printer from the wall outlet, and check the connection between the option and printer.
•
Print the menu settings page, and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it. See Printing the menu settings page on page 29 for more information.
•
Make sure the option is selected in the software application you are using.
For Macintosh computer users: Make sure the printer is set up in Chooser.
The following table lists printer options and suggested corrective actions for related problems. If the suggested corrective
action does not fix the problem, call your service representative.
Option
Action
Drawers
• Make sure the connection between drawers and the printer is secure.
• Make sure the print media is loaded correctly.
Printer memory
Make sure printer memory is securely connected to the printer system board.
Troubleshooting
and
while turning the printer on.
Reduced Curl appears, and then press
On appears, and then press
Exit Config Menus appears, and then press
Turning on Reduced Curl mode
.
.
.
54
Advertisement
Table of Contents
