Table of Contents
Advertisement
5
I
nstall the toner cartridge into the new print cartridge assembly by aligning the white rollers on the toner cartridge
with the white arrows on the tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The
cartridge clicks into place when correctly installed.
6
Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge
assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it
will go.
7
Close the front door.
8
Turn the printer back on.
9
Reset the photoconductor counter (see the instruction sheet that shipped with the new photoconductor kit).
Note: Print your printer menu settings pages. For more information, see Printing the menu settings page
on page 29. If Photoconductor is listed under Warnings, the photoconductor counter has not been
properly reset.
Maintaining the printer
Ordering supplies
43
Advertisement
Table of Contents
