Table of Contents
Advertisement
Avoiding jams
Use appropriate print media (paper, transparencies, labels, and card stock) to help ensure trouble-free printing. See What
types of print media can be loaded? on page 13 for more information.
Note: Try a limited sample of any print media you are considering using with the printer before purchasing
large quantities.
By selecting the appropriate print media and loading it properly, you can avoid most jams. For detailed tray loading
instructions, see the following:
•
Loading the 250-sheet tray on page 21
•
Loading the manual feeder on page 25
The following hints can help you avoid jams:
•
Use only recommended print media.
•
Do not overload the print media sources. Make sure the stack height does not exceed the maximum height
indicated by the stack line on the labels in the sources.
•
Do not load wrinkled, creased, damp, or curled print media.
•
Flex, fan, and straighten print media before you load it. If jams do occur with print media, try feeding one sheet at
a time through the manual feeder.
•
Do not use print media that you have cut or trimmed yourself.
•
Do not mix print media sizes, weights, or types in the same print media source.
•
Make sure the recommended print side is loaded in the source according to your simplex or duplex needs.
•
Keep print media stored in an acceptable environment. See Storing print media on page 19.
•
Do not remove trays during a print job.
•
Push all trays in firmly after loading them.
•
Make sure the guides in the trays are properly positioned for the size of print media you have loaded. Make sure
the guides are not placed too tightly against the stack of print media.
Understanding print media guidelines
Avoiding jams
20
Advertisement
Table of Contents
