Printing Multiple-Language Pdfs; Solving Printing Problems - IBM 1585 (MT 4539) User Manual

Printing multiple-language PDFs

Symptom
Some documents do not
print.

Solving printing problems

Symptom
The operator panel
display is blank or
displays only diamonds.
The message USB
device unsupported
appears when using a
USB device.
Jobs do not print.
Troubleshooting
Cause
The documents contain
unavailable fonts.
Cause
The printer self test
failed.
The USB device you are
using may not be
supported or has an
error. Only specific USB
flash memory devices
are supported.
The printer is not ready
to receive data.
The specified output bin
is full.
The specified tray is
empty.
You are using the wrong
printer driver or are
printing to a file.
Your internal print server
is not set up properly or
is not connected
properly.
You are using the wrong
interface cable, or the
cable is not securely
connected.
Printing multiple-language PDFs
Solution
1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon.
The Print dialog appears.
3 Check the Print as image box.
4 Click OK.
Solution
Turn the printer off, wait about 10 seconds, and turn the printer
back on.
If the Performing Self Test and Ready messages do not
appear, turn the printer off and call for service.
For information regarding tested and approved USB flash memory
devices, contact the place where you bought the printer.
Make sure Ready or Power Saver appears on the display before
sending a job to print. Press
state.
Remove the stack of paper from the output bin, and then press
.
Load paper in the tray.
• Verify you are using the printer driver associated with your
printer.
• If you are using a USB Direct interface, make sure you are
running Windows 98/Me, Windows 2000, Windows XP, or
Windows Server 2003 and using a Windows 98/Me,
Windows 2000, Windows XP, or Windows Server 2003
compatible printer driver.
Verify that you have properly configured the printer for network
printing.
Make sure you are using a recommended interface cable.
Make sure the connection is secure.
95
to return the printer to the Ready