IBM TransNote User Manual page 33

change it, click the Pen-Down is mapped to arrow. Select
which mouse button you want to map the pen to: Left,
Center, or Right mouse button. For example, if you select
Right, a tap acts as a right-mouse click.
When Graphics Tablet Mode is enabled, adjust the following
settings for your pen taps:
• Move the Double-Click Speed slider from left (Slow) to right
(Fast) to increase or decrease the speed at which the double-
click happens.
• Move the Double-Click Area slider from left (Small) to right
(Large) to increase the area of the double-click range.
• Double-click in the green Test area to see if your double-
click is recognized. If it is, the area turns yellow. Double-click
it again to turn it back to green. If the program does not
recognize the double-click, follow steps 4 and 5 to adjust the
Speed and Area settings until it does.
Ink Manager Pro Setup
27