Table of Contents
Advertisement
Compacta VariO US
EN
Compacta VariO US - 2018/05 - Rev. 01
7.2 WATER COOLING
In the case of water-cooled machines, water must be drained from condenser circuit at the end
of the season in order to avoid troubles in the event that the machine is stored in rooms where
temperature may fall under 32°F.
- Slide out inlet and outlet pipes from their seats and let water flow out from circuit by starting
the machine for a few seconds.
7.3 AIR COOLING
Clean condenser, periodically, so as to remove dust, paper and whatever prevents air from
circulating.
For cleaning, use a brush with long bristles or a bolt of compressed air.
personal protective devices in order to avoid accidents;
Never use sharp metal objects to carry out this operation; the correct operation of a
refrigeration system largely depends on how clean the condenser is.
NOTE:
For machines equipped with air-cooled condenser and water-cooled condenser, consider both
precautions indicated in paragraphs 7.2 and 7.3.
7.4 SHOWER SEAT CLEANING
Periodically clean the hose and the shower seat:
- disconnect the machine from the mains and remove machine side panel (shower side)
- remove the shower from the hose and slide the hose out of the shower seat
- externally clean the hose and the shower seat using a brush
- reassemble hose, shower and machine side panel in the reverse sequence.
7.5 ORDERING SPARE PARTS
In the event of breaking or wear of one or more parts, request the new ones directly to a ICETEAM
1927 Engineer, always detailing machine type and serial number printed on identification plate
located on the back of the machine.
Before using spare parts and/or supplied parts intended to come into contact with the
product on the machine, it is absolutely necessary to clean and sanitize them as indicated
WARNING!
When using compressed air, use
wear protective goggles!
WARNING!
WARNING
in sec. 6 of this manual
- 50 -
Fig. 31
Advertisement
Table of Contents
