Table of Contents
Advertisement
Compacta VariO US
5. SAFETY DEVICES
5.1 MACHINE SAFETY SYSTEMS
WARNING!
It is strictly forbidden to operate the machine in case the safety-related devices have
been disabled, altered or tampered with.
ICETEAM 1927 will NOT be held responsible for any damage or injury to persons and/
or property, in case any safety-related devices, designed to grant the safety of operator
and machine, have been disabled, altered or tampered with.
Safety systems available in the machines are:
THERMAL RELAYS
They detect anomalous absorptions of beater motor and motor-driven compressor; when maximum
calibration values are reached, the machine stops and sets to alarm mode.
Before restoring operation, it is necessary to check the triggering cause.
Thermal relays can be reset automatically.
PRESSURE SWITCH
It protects the cooling system and causes the stop of circuit cooling compressor, in case of lack
of water in the circuit (water-cooled condensation) or lack of air circulation in the condenser
(air-cooled condensation). The reset is automatic.
WARNING
If the compressor runs for an excessive time or stops and starts repeatedly, this indicates
insufficient condensation; check the causes.
FUSES
They protect the electric circuit of controls from overloads.
If they trigger, check and remove the cause of the failure before replacing them.
NOTE:
To identify rating and characteristics of fuses refer to the machine wiring diagram.
NOTE:
Every time a safety device trips, the machine displays the type of automatic intervention in progress.
EN
Compacta VariO US - 2018/05 - Rev. 01
- 37 -
Advertisement
Table of Contents
