Table of Contents
Advertisement
4.
INSTRUCTIONS FOR USE
4.1 MACHINE SAFETY WARNINGS
When using industrial equipment and plants, one must be aware of the fact that moving parts
(rotary motion), high voltage components, as well as parts subject to high temperatures, etc. may
cause serious damage to persons and things.
The persons in charge of safety must ensure that:
-
An incorrect use or handling is avoided
-
Safety devices are neither removed nor tampered with
-
The machine is regularly serviced
-
Only original spare parts are used, especially as far as those components with safety functions
are concerned (ex.: protection microswitches, stop buttons, differential switches etc.)
-
Suitable personal protective equipment is worn
-
Attention is paid during hot product cycling.
To achieve the above, the following is necessary:
-
An instruction manual relevant to the machine should be available at the work station.
-
Such documentation must be carefully read and requirements must consequently be met.
-
Only suitably skilled personnel should be assigned to electrical equipment.
4.1.1 Machine configuration
The machine has two motors to drive the beater units, and a cooling system with water-cooled or
air-cooled condenser (or both, according to the version).
The product preparation is carried out by filling the cooking cylinder or the freezing cylinder with
the mix and by starting the automatic production cycle.
When the cycle ends, the product can be dispensed using the proper handles.
In any case, do not touch the spigot door during the heating stage or the stages
immediately after, since it can reach very high temperatures.
Be very careful during the processing/extraction of hot products – coming into contact with
Do not open neither the out door nor the spigot door when the machine is running.
To make product dispensing easier, only use the plastic spatula supplied. Never use metal
spatulas as these could damage the machine.
Mix
Finished
product
WARNING
WARNING
the product could cause burns.
WARNING
- 21 -
Compacta VariO US - 2018/05 - Rev. 01
Compacta VariO US
EN
Advertisement
Table of Contents
