Table of Contents
Advertisement
Compacta VariO US
3.6 POSITIONING THE MACHINE
The machine is fitted with wheels to ease its positioning. The wheels feature mechanical lock mecha-
nisms which, once engaged, prevent the machine from moving and shifting to a different position.
Fig. 14
Eliminate external dust from your machine and remove the protective product which was spread
on it before delivery.
Use a soft cloth and water, with addition of a mild soap-detergent if necessary.
WARNING
Avoid using solvents, alcohol or detergents that could damage machine
parts or pollute the functional production parts.
3.7 TOP-UPS
Motor installed in the machine is of the type with lubrication for life; no action of checking/
replacing or topping up is necessary.
Gas filling necessary to the circuit is carried out at ICETEAM 1927 factory during the machine
post production testing; top-ups or filling are not required if the machine is new.
If any gas top-up or filling becomes necessary, this must be made solely by skilled engineers, able
to determine the reason of such occurrence.
3.8 MACHINE TESTING
The machine is tested after production at ICETEAM 1927's premises; the requested operational
and production functions are inspected and verified.
Machine test at the end user's premises must be carried out by authorized technical personnel or
by one of ICETEAM 1927 engineers.
After positioning the machine and connecting it properly to the supply lines, proceed with the
operations related to the functional check and with the operating test of the machine.
EN
Compacta VariO US - 2018/05 - Rev. 01
- 20 -
Advertisement
Table of Contents
