Precision Measuring Tools - Yamaha MM700A Manual

12
HOW TO MEASURE TORQUE WRENCH EFFECTIVE LENGTH
Snap Ring Pliers
Snap ring or snap ring pliers (Figure 22) are specialized
pliers with tips that fit into the ends of snap rings to re-
move and install them.
Snap ring pliers are available with a fixed action (either
internal or external) or convertible (one tool works on
both internal and external snap rings). They may have
fixed tips or interchangeable ones of various sizes and an-
gles. For general use, select a convertible type plier with
interchangeable tips.
WARNING
Snap rings can slip and
ing installing them. Also, the snap ring
and
plier tips may break. Always wear eye
tection when using snap ring pliers.
L A Effective length (E)
Effective length (E)
No calculation needed
fly off when remov-
pro-
Hammers
Various types of hammers (Figure 23) are available to
fit a number of applications. A ball-peen hammer is used
to strike another tool, such as a punch or chisel. Soft-faced
hammers are required when a metal object must be struck
it. Never
without damaging
engine and suspension components, as damage will occur
in most cases.
Always wear eye protection when using hammers.
Make sure the hammer face is in good condition and the
handle is not cracked. Select the correct hammer for the
job and make sure to strike the object squarely. Do not use
the handle or the side of the hammer to strike an object.

PRECISION MEASURING TOOLS

The ability to accurately measure components is essen-
tial to successfully rebuild an engine. Equipment is manu-
CHAPTER ONE
use a metal-faced hammer on