Intended Use; Foreseeable Misuse - LEAB CDR 12/24 V User Manual

LEAB Automotive GmbH
Burns from escaping acid
Acid can leak out when handling batteries.
Danger from short circuits
Contact of the screw terminals with metallic and/or conductive
vehicle parts can cause short circuits that can lead to serious
injuries.

2.1 Intended Use

The CDR 12/24 V can be installed between the starter and auxiliary battery as
an electronic charging current distributor. The charging current can be distrib-
uted both bi-directionally and unidirectionally. The batteries are charged al-
most loss-free and the plastic housing protects against short circuits.
Thanks to a switch-off function, it can also be used as an automatic cut-off re-
lay to switch a consumer or an on-board supply system on or off.
The device is designed for an operating temperature of -40 °C ... +60 °C.

2.2 Foreseeable Misuse

Use the insulating caps supplied.
Protect supply lines with a suitable fuse.
Only use appropriate electrical cables with a suitable cross-section.
Only use suitable ring cable lugs and tools intended for this purpose.
Install the CDR in such a way that cooling is made possible by air supply.
LEAB Automotive GmbH
WARNING
1. Wear acid-proof clothing when handling batteries.
WARNING
1. Avoid contact of the screw terminals with metallic and/or
conductive vehicle parts.
Thorshammer 6
2 General Safety
24866 Busdorf 5