Intended Use - LEAB CHAMP PRO 24 V User Manual

LEAB Automotive GmbH

2.1 Intended Use

The charger is designed for permanent installation in vehicles with 12 or 24 V
on-board power systems for charging Lead-acid batteries (wet, gel, AGM). It is
suitable for charging and trickle charging auxiliary batteries. The device is de-
signed for a temperature range of -30 °C ... 60 °C. Do not charge batteries with
this charger outside the specified temperature range. At higher temperatures,
the output power of the charger automatically decreases.
Risk of fire from overheated battery
Flammable gases can escape if the battery overheats.
Risk of injury from damaged, frozen or deformed batteries
Damaged, frozen or deformed batteries can cause injuries.
Burns from escaping acid
Acid can leak out when handling batteries.
Notice
Device defects from incorrect installation
Incorrect installation can result in device defects.
LEAB Automotive GmbH
WARNING
1. Always charge batteries in well-ventilated rooms and away
from ignition sources.
WARNING
1. Before using the battery, make sure that the battery is un-
damaged and the electrolyte is not frozen.
WARNING
1. Wear acid-proof clothing when handling batteries.
1. Install the device in a dry and cool location.
Thorshammer 6
2 Safety
24866 Busdorf 5