Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Housing Assembly - Yamaha F15B Service Manual

Removing the propeller shaft
housing assembly
1. Remove the bolts and remove the pro-
peller shaft housing assembly by prying
the tabs apart with flat-head screw-
drivers.
NOTE:
Make sure that the shims left in the lower
case have been removed.
Disassembling the propeller shaft
housing assembly
1. Remove the reverse gear and shim.
2. Check that the bearing spins smoothly in
the housing. Check for roughness, wear,
and damage.
6D45F11
3. Remove the ball bearing.
6D460070
4. Remove the oil seals, then remove the
needle bearing.
6B460100
NOTE:
When the oil seal or the needle bearing is
removed, always replace them with new
ones.
6B460620
Propeller shaft housing
4
2
Stopper guide plate 1:
90890-06501
Stopper guide stand 2:
90890-06538
Bearing puller assembly 3:
90890-06535
Center bolt 4:
90890-06540
5
6
Driver rod L3 5:
90890-06652
Needle bearing attachment 6:
90890-06616
1
1
3
2
3
6B460110
4
5
6
7
8
6B460120
9
6-10