Yamaha F15B Service Manual page 154

BRKT
4. Install the rubber seal q and water tube
w to the upper mount e.
5. Install the upper mount e and lower
mount brackets r.
w
q
NOTE:
First tighten the rear side bolts t, then tight-
en the front side bolts y to specified torques.
Upper mount bolts:
12 N·m (1.2 kgf·m, 8.7 ft·lb)
Upper mount nuts:
21 N·m (2.1 kgf·m, 16 ft·lb)
Lower mount bolts:
32 N·m (3.2 kgf·m, 23 ft·lb)
7-15
Bracket unit
e
q
r
r
t
y
6D470100
6. Install the buffer plate u to the oil pan.
NOTE:
Face the "FRONT" mark side to install.
7. Install the dowel pins i, new gasket o
and oil pan on to the upper case.
o
Oil pan:
8 N·m (0.8 kgf·m, 5.8 ft·lb)
i
u
i
6D470110
6D45F11